Paint Inspection Gauge

Share on FacebookTweet about this on TwitterShare on LinkedInShare on Google+Pin on Pinterest
INQUIRY

Introduction:

BEVS1707 PIG is using destructive method to measure coating thickness, containing single and multiple coats, applied on all of substrates, e.g. aluminium, iron, plastic, wood, concrete, glass etc.

Using Principle:

A cut is made on the test surface with a V-shaped tool.The coating thickness can be measured with the built-in microscope underthe LED light.

Standard:

ASTM D4138, DIN 50986, ISO 2808

Technical Specification:

Cutter Cut Angle Range(μm) D Factor(μm)
No.1 45° 20-1800 20
No.2 63.4° 10-900 10
No.3 84.3° 2-180 2

Measurement Principle:

wKiAiVZG70aIniiwAADP_rdwkqg433

Operating Steps:

Step Illustration Description
1     Prepare the inspecting area
2    Draw a line with the marker pen on the surface
3     Cut the coating vertically and make sure it is lacerated
4     Read the graduation-scale with the microscope to attain thickness

Order Information:

BEVS 1707            Paint Inspection Gauge
Including 1 pc of No.1 Cutter, battery, marker pen and carrying case

Order Information of Accessories:

BEVS 1707 PIG/1             Cutter No.1
BEVS 1707 PIG/2             Cutter No.2
BEVS 1707 PIG/3             Cutter No.3

 

 

Share on FacebookTweet about this on TwitterShare on LinkedInShare on Google+Pin on Pinterest